Version

EventManager Property (UltraDayView)

Returns the object that enables, disables and controls the firing of UltraDayView specific events.
Syntax
'Declaration
 
Public ReadOnly Property EventManager As DayViewEventManager
public DayViewEventManager EventManager {get;}
Remarks

The UltraDayView event manager gives you a high degree of control over how the UltraDayView invokes event procedures. You can use it to selectively enable and disable event procedures depending on the context of your application. You can also use the event manager to return information about the state of the control's events.

Example
The following code demonstrates how to use the UltraDayView's Event Manager to enable/disable events and event groups, and to check to see whether specific events or event groups are enabled.

Imports Infragistics.Win
Imports Infragistics.Win.UltraWinSchedule

	Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button5.Click

		' Get the UltraDayView's event manager.
		' The event manager is used to temporarily disable events
		' to prevent them from being raised. This can be very
		' convenient in a situation where one or more properties
		' are being set in code and the events they would normally 
		' raise would cause unnecessary or counter-productive
		' code to be executed.
		'
		' Note: All events are enabled by default.
		Dim eventManager As DayViewEventManager = Me.UltraDayView1.EventManager


		' Disable the Before/AfterTimeSlotSelectionChanged events
		eventManager.SetEnabled(DayViewEventIds.BeforeTimeSlotSelectionChanged, False)
		eventManager.SetEnabled(DayViewEventIds.AfterTimeSlotSelectionChanged, False)


		' Select the same time slot in the next day.
		' Note: This would normally cause the Before/AfterSelectChange 
		' events to be raised. However, since the above code disabled
		' the events they won't be.
		Me.UltraDayView1.PerformAction(UltraDayViewAction.SameTimeSlotNextDay)


		' Re-enable the Before/AfterTimeSlotSelectionChanged events
		eventManager.SetEnabled(DayViewEventIds.BeforeTimeSlotSelectionChanged, True)
		eventManager.SetEnabled(DayViewEventIds.AfterTimeSlotSelectionChanged, True)


		' The 'AllEventsEnabled' property lets you enable/disable
		' all events will a single line of code. If any event is 
		' disabled the 'AllEventsEnabled' property returns false.
		If (Not eventManager.AllEventsEnabled) Then
			eventManager.AllEventsEnabled = True
		End If


		' The event manager also exposes an 'IsEnabled' method
		' to see if an event is enabled or disbled.
		If (Not eventManager.IsEnabled(DayViewEventIds.BeforeAppointmentEdited)) Then
			eventManager.SetEnabled(DayViewEventIds.BeforeAppointmentEdited, True)
		End If


		' The CanFireEvent method indicates whether the specified event can be fired.
		' This can return false if the control is not in the correct state for the
		' specified event to be fired.
		If eventManager.CanFireEvent(DayViewEventIds.BeforeAppointmentEdited) Then
			Debug.WriteLine("The BeforeAppointmentEdited event can be fired at this time.")
		Else
			Debug.WriteLine("The BeforeAppointmentEdited event CANNOT be fired at this time.")
		End If


		' The event manager also exposes overloaded 
		' 'IsEnabled' and 'SetEnabled' methods that take an  
		' event group so that, for example all 'Before' or all
		' 'After' events can be enabled/disabled. If any event
		' in the group is disabled the 'IsEnabled' method returns
		' false.
		If (Not eventManager.IsEnabled(DayViewEventGroups.BeforeEvents)) Then
			eventManager.SetEnabled(DayViewEventGroups.BeforeEvents, True)

			eventManager.SetEnabled(DayViewEventGroups.AfterEvents, True)


			' The 'InProgress' method will return true if the 
			' specified event is currently being raised. This
			' is often helpful in methods that can be called
			' from various points in an application to determine
			' what is triggering the call.
			If (eventManager.InProgress(DayViewEventIds.BeforeAppointmentResized)) Then
				' ... 
			End If
		End If

	End Sub
using Infragistics.Win;
using Infragistics.Win.UltraWinSchedule;

		private void button5_Click(object sender, System.EventArgs e)
		{

			// Get the UltraDayView's event manager.
			// The event manager is used to temporarily disable events
			// to prevent them from being raised. This can be very
			// convenient in a situation where one or more properties
			// are being set in code and the events they would normally 
			// raise would cause unnecessary or counter-productive
			// code to be executed.
			//
			// Note: All events are enabled by default.
			DayViewEventManager eventManager = this.ultraDayView1.EventManager;


			// Disable the Before/AfterTimeSlotSelectionChanged events
			eventManager.SetEnabled(DayViewEventIds.BeforeTimeSlotSelectionChanged, false);
			eventManager.SetEnabled(DayViewEventIds.AfterTimeSlotSelectionChanged, false);


			// Select the same time slot in the next day.
			// Note: This would normally cause the Before/AfterSelectChange 
			// events to be raised. However, since the above code disabled
			// the events they won't be.
			this.ultraDayView1.PerformAction(UltraDayViewAction.SameTimeSlotNextDay);


			// Re-enable the Before/AfterTimeSlotSelectionChanged events
			eventManager.SetEnabled(DayViewEventIds.BeforeTimeSlotSelectionChanged, true);
			eventManager.SetEnabled(DayViewEventIds.AfterTimeSlotSelectionChanged, true);


			// The 'AllEventsEnabled' property lets you enable/disable
			// all events will a single line of code. If any event is 
			// disabled the 'AllEventsEnabled' property returns false.
			if ( !eventManager.AllEventsEnabled )
				eventManager.AllEventsEnabled = true;


			// The event manager also exposes an 'IsEnabled' method
			// to see if an event is enabled or disbled.
			if (!eventManager.IsEnabled(DayViewEventIds.BeforeAppointmentEdited))
				eventManager.SetEnabled(DayViewEventIds.BeforeAppointmentEdited, true );


			// The CanFireEvent method indicates whether the specified event can be fired.
			// This can return false if the control is not in the correct state for the
			// specified event to be fired.
			if (eventManager.CanFireEvent(DayViewEventIds.BeforeAppointmentEdited))
				Debug.WriteLine("The BeforeAppointmentEdited event can be fired at this time.");
			else
				Debug.WriteLine("The BeforeAppointmentEdited event CANNOT be fired at this time.");


			// The event manager also exposes overloaded 
			// 'IsEnabled' and 'SetEnabled' methods that take an  
			// event group so that, for example all 'Before' or all
			// 'After' events can be enabled/disabled. If any event
			// in the group is disabled the 'IsEnabled' method returns
			// false.
			if (!eventManager.IsEnabled(DayViewEventGroups.BeforeEvents))
				eventManager.SetEnabled(DayViewEventGroups.BeforeEvents, true );

			eventManager.SetEnabled(DayViewEventGroups.AfterEvents, true );


			// The 'InProgress' method will return true if the 
			// specified event is currently being raised. This
			// is often helpful in methods that can be called
			// from various points in an application to determine
			// what is triggering the call.
			if (eventManager.InProgress(DayViewEventIds.BeforeAppointmentResized))
			{
				// ... 
			}

		}
Requirements

Target Platforms: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Server 2012, Windows 7, Windows Vista SP1 or later, Windows XP SP3, Windows Server 2008 (Server Core not supported), Windows Server 2008 R2 (Server Core supported with SP1 or later), Windows Server 2003 SP2

See Also