Hi,
I use a wingrid which auto refreshes every 5 seconds.The problem that I face is when the user scrolls down the grid, suddenly the grid refreshes and moves back up to the top.I want the grid to stay in the same scroll area after refreshing.I set the the first row as active row after every refresh.
So how to save the current scroll position and load the same back after refresh?Or can anyone suggest a better solution?
Thanks,
Abja
I used this in the past after refreshing...
grid.Rows.ScrollCardIntoView(grid.ActiveRow);
This takes a row that it scrolls into view you'll need to know where you are in the grid as your setting you active row to the first...
You are going to lose more than just the scroll position. If you are resetting your data source, you will lose all state information in the grid. This includes row height, expanded state, column widths, selected rows, etc.
So you are probably better off not resetting the data source if you can avoid it.
The above line of code will only work in CardView, so that's probably not the right way to do. What you want is the FirstRow property on the ActiveRowScrollRegion. You can set this to the row you want at the top.
However, you can't store the row you had before the reset and then use the same row to restore the position, because the rows will all be destroyed and a whole new set of rows created. So the row you store won't be in the grid any more after the reset takes place. You will have to store some kind of key information about the row and then find that row again.
Hi Mike,
Thanks for the reply.I managed to reload the state information by using the displaylayout.save() and load functions.But what I want to set is the active scroll region same as the old.I tried as you said.But the grid's FirstRow property on the ActiveRowScrollRegion is always the filter row as I have a filter row on the top.The active scroll region actually changes from the second row only. What I have to set is the second row.I am able to get the second row from the visible rows collection and i can keep the ID or some other value for finding the same row after refresh.
But I dont know which property I need to set ? Or plz advice me how to handle this?
Thanks in advanz
Hi Abja,
Hm. Maybe you could use the ScrollRowIntoView method. This is also on the ActiveRowScrollRegion. I think this method might have an overload that allows you to specify that you want the row scrolled to the top, but I could be wrong.
Also note that the DisplayLayout does not include any row or cell settings. So it will take care of the column width (since columns are on the band and thus part of the data structure), but it will not include the expanded or selected state of the rows.
I'm not sure it's a good idea to call BeginInvoke on the delegate. You should probably be calling BeginInvoke on the grid or the form and passing in the delegate.
But if that didn't work, then it's most likely a moot point, anyway.
AndyCaignie said: That is something I don't understand. It would be something like this: int i = 0; int j = 5; i = j; and when you set a Watch on i it would still be 0 instead of 5, this is what happens with the DisplayLayout.RowScrollRegions[0].FirstRow property. It's not logical.
That is something I don't understand.
It would be something like this:
int i = 0;
int j = 5;
i = j;
and when you set a Watch on i it would still be 0 instead of 5, this is what happens with the DisplayLayout.RowScrollRegions[0].FirstRow property. It's not logical.
I'm not sure why this is happening. As I said above, my theory is that it's because the grouping has not completed yet or the FirstRow is getting changed again at some point after you said it, but I'm only guessing here, since I can't see the behavior.
Perhaps at this point, you should try to create a small sample project that demonstrates the problem and either post it here or Submit an incident to Infragistics Developer Support so we can check it out.
Ok, I successfuly managed to implement a delegate to a SetFirstRow Method. After the LoadData method I call this method through the delegate.BeginInvoke(null, null). This calls my SetFirstRow method, I checked this. But the FirstRow is still not changed.
I think it's something to do with the fact that you can't set a groupedbyrow as FirstRow or something like that. I have the Correct row stored, I set it:
not set to correct row <- ugvShipmentMovements.DisplayLayout.RowScrollRegions[0].FirstRow = ugvShipmentMovements.FirstRow; -> correct row
AndyCaignie said:I don't know quite yet if it's a time issue. The weird thing is that it works for datarows and not for groupbyrows.
This makes perfect sense as a timing issue. If the grid is not grouped, the rows are there. If it's grouped, the grouping is done asynchronously.
AndyCaignie said:About the BeginInvoke, I don't knwo how to implement this. Isn't that used for assynchronously calls and multithreading? Don't know for sure this is a good idea.
BeginInvoke is usually used to marshal across threads, but you can call it on the same thread. You just create a method that does what you need to do, then create a delegate to that method and call BeginInvoke with that delegate.
Do a search on this forum for BeginInvoke, I'm sure there are some sample code snippets posted.
I don't know quite yet if it's a time issue. The weird thing is that it works for datarows and not for groupbyrows.
I call the LoadData fucntion at several locations on the frmShipmentMovement Form, the refresh button click, the applyfilter method ... each time the data needs to be fresh.
The InitializeLayout Method is called before the LoadData Method when I debug.
About the BeginInvoke, I don't knwo how to implement this. Isn't that used for assynchronously calls and multithreading? Don't know for sure this is a good idea.
Okay, so it's pretty clear to me that this is a timing issue of some kind. You are setting the FirstRow on the grid and it's getting reset by something that happens after the LoadData method is called.
Where is LoadData being called from?
Perhaps it would be better to move the line of code that sets the FirstRow on the RowScollRegion of the grid to some later point, such as in the InitializeLayout event of the grid.
If that's no good, then another option would be to create a separate method that sets the FirstRow and instead of calling the method directly from LoadData, you use a BeginInvoke to call it. That will create a delay that might solve the issue.